ChipSea DC-DC Converters | BeiLuo Distributor

About DC-DC Converters

High-efficiency buck, boost, and buck-boost DC-DC converters for portable and industrial power applications.

As an authorized distributor of ChipSea, BeiLuo provides a comprehensive range of DC-DC Converters products. These products are widely used in industrial control, automotive electronics, consumer electronics, and communication equipment. We offer a complete product line with multiple series to meet various application requirements. All products are genuine and original, backed by professional technical support and comprehensive after-sales service.

Selection Guide: How to Choose the Right DC-DC Converters

Product List

2 products available

Part Number ↕	Input Voltage ↕	Output Voltage ↕	Output Current ↕	Switching Frequency ↕	Efficiency ↕	Package ↕	Stock Status	Action
CS5080	2.5V to 5.5V	0.6V to Vin	1A max	1MHz	Up to 95%	SOT23-5	In Stock	View Details
CS5081	2.5V to 5.5V	-	2A max	1MHz	Up to 94%	SOT23-5	In Stock	View Details

Need DC-DC Converters Products?

Download Datasheet Request Samples Get Quote Contact FAE

Frequently Asked Questions

What is the difference between synchronous and non-synchronous buck converters?

Synchronous buck converters use a MOSFET instead of a diode for the low-side switch, improving efficiency especially at low output voltages and high currents. The CS508x series uses synchronous rectification to achieve efficiencies up to 95%. Non-synchronous converters use a Schottky diode, which is simpler but less efficient due to diode forward voltage drop. Synchronous converters are preferred for battery-powered applications where efficiency is critical.

Choose synchronous converters for high-efficiency battery-powered applications.

How do I select the right inductor for a DC-DC converter?

Inductor selection affects efficiency, ripple current, and transient response. The inductance value is calculated based on input/output voltages, switching frequency, and desired ripple current (typically 20-40% of output current). Higher inductance reduces ripple current but increases size. For CS508x buck converters at 1MHz switching, typical inductance values are 2.2uH to 4.7uH for 1-2A output currents.

Calculate inductance based on ripple current requirements; ensure saturation rating exceeds peak current.

What is PFM mode and when should I use it?

PFM (Pulse Frequency Modulation) mode is a power-saving operating mode used at light loads. Unlike PWM which maintains constant frequency, PFM reduces switching frequency at light loads to minimize switching losses. The CS508x series automatically switches to PFM mode at light loads, maintaining high efficiency across the entire load range. This is especially beneficial for battery-powered devices with varying or light loads.

PFM mode is automatic; it provides best light-load efficiency for battery-powered applications.

How do I minimize EMI in DC-DC converter designs?

EMI minimization requires attention to PCB layout and filtering. Place input capacitors close to the IC input pins to minimize switching loop area. Use a solid ground plane under the switching node. Add an RC snubber across the switching node if needed. Use shielded inductors to reduce magnetic field radiation. Keep switching traces short and away from sensitive analog circuits. Add input and output filters for conducted EMI suppression.

Follow PCB layout guidelines; use proper filtering and shielding techniques.

What efficiency can I expect from CS508x converters?

The CS508x series synchronous buck converters achieve efficiencies of 90-95% depending on operating conditions. Peak efficiency typically occurs at moderate loads (50-70% of rated current). Efficiency remains high even at light loads due to automatic PFM mode switching. Input-output voltage difference affects efficiency - smaller differences yield higher efficiency. Use of appropriate inductors with low DCR and quality ceramic capacitors helps maximize efficiency.

Expect 90-95% efficiency at moderate loads; efficiency remains high even at light loads.