YMTC Enterprise SSD Solution

YMTC-based enterprise SSDs are available in capacities from 1TB to 8TB in standard M.2 2280 and 2.5-inch form factors. The X4-9070 NAND enables high-density designs with up to 1Tb per die, allowing 8TB capacity in single-sided M.2 modules. For higher capacities, U.2 and E1. S form factors can support 16TB+ configurations. Contact LiTong for specific capacity and form factor options for your application.

Choose capacity based on application needs: 1-2TB for boot drives, 4-8TB for data storage.

YMTC-based enterprise SSDs offer endurance ratings from 1 to 3 DWPD (Drive Writes Per Day) depending on the specific design and over-provisioning. The X4-9070 NAND provides 5,000+ P/E cycles, enabling high-endurance designs. For example: 1 DWPD on a 4TB drive allows 4TB of writes per day for 5 years. Choose 1 DWPD for general-purpose storage, 3 DWPD for write-intensive applications like databases or virtualization.

Select 1 DWPD for general use, 3 DWPD for write-intensive workloads.

Yes, YMTC-based enterprise SSDs include comprehensive power-loss protection (PLP): (1) Hardware PLP - onboard capacitors provide backup power to flush volatile caches to NAND

(2) Firmware PLP - journaling and checkpointing ensure data consistency

(3) NAND protection - program suspend/resume capabilities prevent data corruption. Our enterprise SSDs are tested with thousands of power cycle events to ensure data integrity. This protection is critical for data center applications where unexpected power events can occur.

All enterprise SSDs include PLP as standard feature for data integrity.

YMTC-based enterprise SSDs support multiple interfaces: (1) PCIe Gen4 x4 NVMe - highest performance up to 7GB/s, ideal for modern data centers

(2) PCIe Gen3 x4 NVMe - widely compatible, up to 3.5GB/s

(3) SATA III - legacy compatibility, up to 550MB/s. NVMe is recommended for new designs due to superior performance and latency. SATA is suitable for legacy system upgrades. U.2, M.2, and E1. S form factors available depending on interface and capacity requirements.

Choose PCIe Gen4 NVMe for new designs, SATA for legacy compatibility.

YMTC-based enterprise SSDs typically come with a 5-year warranty covering defects and endurance. Warranty terms include: (1) Time limit - 5 years from date of purchase

(2) Endurance limit - based on DWPD rating (e.g., 1 DWPD x 5 years)

(3) SMART monitoring - track health and endurance usage

(4) Replacement - advance replacement options available. The warranty ensures the SSD will maintain specified performance and endurance throughout the warranty period under normal operating conditions.

5-year standard warranty with endurance coverage based on DWPD rating.