XHSC Motor Control | BeiLuo Distributor

About Motor Control

Intelligent motor drivers and control solutions for BLDC, PMSM, and stepper motors in industrial and automotive applications.

As an authorized distributor of XHSC, BeiLuo provides a comprehensive range of Motor Control products. These products are widely used in industrial control, automotive electronics, consumer electronics, and communication equipment. We offer a complete product line with multiple series to meet various application requirements. All products are genuine and original, backed by professional technical support and comprehensive after-sales service.

Selection Guide: How to Choose the Right Motor Control

Product List

1 products available

Part Number ↕	Motor Type ↕	Voltage Range ↕	Output Current ↕	Gate Drive Current ↕	PWM Frequency ↕	Package ↕	Stock Status	Action
XHSC-BLDC-36V10A	Three-phase BLDC/PMSM	8V to 36V	10A Continuous, 15A Peak	1A Source/Sink	Up to 100kHz	QFN48, TQFP64	In Stock	View Details

Need Motor Control Products?

Download Datasheet Request Samples Get Quote Contact FAE

Frequently Asked Questions

What types of motors can XHSC motor control ICs drive?

XHSC motor control ICs support multiple motor types: 1) BLDC Motors - Brushless DC motors with trapezoidal or sinusoidal commutation, sensorless or sensored operation. Voltage ranges from 12V to 600V, power up to 5kW. 2) PMSM Motors - Permanent magnet synchronous motors with FOC (Field Oriented Control) for high-efficiency operation. Suitable for servo applications requiring precise torque and speed control. 3) Stepper Motors - Bipolar stepper motors with microstepping up to 1/256 for smooth motion. Integrated current regulation and decay modes. 4) DC Motors - Brushed DC motors with PWM speed control and direction reversal. Integrated H-bridge or external MOSFET drive options.

Select based on your motor type and application requirements. Contact our motor control FAE for algorithm recommendations.

What is the difference between sensorless and sensored motor control?

Sensorless and sensored motor control is two different approaches to determining rotor position: 1) Sensored Control - Uses Hall effect sensors or encoders to directly measure rotor position. Advantages include reliable startup, precise position control, and operation at very low speeds. Disadvantages include additional wiring, sensor cost, and potential sensor failure. 2) Sensorless Control - Estimates rotor position by monitoring back-EMF or motor currents. Advantages include lower cost, reduced wiring, and higher reliability. Disadvantages include potential startup issues and reduced performance at very low speeds. XHSC offers ICs supporting both approaches, with some products supporting seamless transition from sensored to sensorless operation for optimal performance.

Use sensored control for applications requiring precise positioning or low-speed operation. Use sensorless for cost-sensitive applications with moderate speed ranges.

What protection features do XHSC motor drivers include?

XHSC motor drivers include comprehensive protection features: 1) Overcurrent Protection - Fast current limiting and shutdown protects against motor stall and short circuits. 2) Overvoltage Protection - Protects against regenerative voltage spikes during deceleration. 3) Undervoltage Lockout - Prevents erratic operation during low battery or power supply conditions. 4) Thermal Protection - Monitors die temperature and shuts down when exceeding safe limits. 5) Shoot-Through Protection - Prevents simultaneous conduction of high-side and low-side switches. 6) Adjustable Dead-Time - Configurable delay between switching transitions prevents cross-conduction. 7) Fault Reporting - Digital fault flags indicate specific protection events for system diagnostics.

All XHSC motor drivers include essential protections. For harsh environments, select parts with enhanced protection and higher voltage/current margins.

How do I select the right gate driver for my motor application?

Selecting the right gate driver involves several considerations: 1) Voltage Rating - Must exceed maximum DC bus voltage with margin (typically 1.5x). XHSC offers 60V, 100V, 200V, and 600V options. 2) Current Drive Capability - Higher gate drive current enables faster switching, reducing switching losses. XHSC offers 0.5A to 4A drive capability. 3) Bootstrap vs Isolated - Bootstrap suitable for simple applications, isolated drivers for high-voltage or safety-critical systems. 4) Protection Features - Look for UVLO, shoot-through protection, and fault reporting. 5) Package - SOIC, QFN, or DIP depending on space and thermal requirements. For typical 24V-48V industrial applications, XHSC-GD2004 (200V, 4A) is an excellent choice.

Match gate driver voltage and current ratings to your MOSFETs and application requirements. Contact our FAE team for specific recommendations.

Are XHSC motor control ICs suitable for automotive applications?

Yes, many XHSC motor control ICs are AEC-Q100 qualified for automotive applications. These products feature: 1) Extended temperature range - Qualified for -40°C to +125°C (Grade 1) and -40°C to +150°C (Grade 0). 2) Enhanced EMC performance - Meet automotive CISPR 25 and ISO 11452 requirements for EMI/EMC. 3) Functional safety support - Documentation available for ISO 26262 ASIL development. 4) Robust protection - Comprehensive fault detection and reporting for safety-critical systems. 5) High reliability - Automotive-grade screening and qualification. Typical automotive applications include electric power steering, HVAC blowers, cooling fans, fuel pumps, and window lift motors. Contact our automotive FAE team for safety concept support.

For automotive motor control, specify AEC-Q100 qualified parts. Contact our automotive team for functional safety documentation.