CPS datasheets are available through our technical support portal or by contacting our sales team. Datasheets include complete electrical characteristics, mechanical dimensions, and application information. Always use the latest revision for new designs.

Download the latest datasheet revision from our portal. Check for errata and application notes related to your specific device.

datasheet documentation specifications

How do I get design support?

Our FAE team provides comprehensive design support including device selection, schematic review, PCB layout guidance, and troubleshooting. Contact us through the support portal or your local sales representative.

Contact FAE early in the design phase with your requirements. Provide detailed specifications for accurate recommendations.

design support FAE technical assistance

Are SPICE models available?

SPICE models are available for many CPS power devices. These models can be used with popular simulation tools for circuit verification. Contact technical support for access to simulation models and application guidance.

Request simulation models for your selected devices. Validate critical circuit behaviors before building prototypes.

SPICE simulation model design verification

What application notes are available?

CPS provides application notes covering device selection, thermal design, PCB layout, and specific application circuits. These documents provide detailed guidance for optimizing designs with CPS products.

Review relevant application notes before starting your design. Follow recommended practices for optimal performance and reliability.

application note design guide application

How do I request samples?

Samples can be requested through our website or by contacting your local sales representative. Standard sample lead time is 1-2 weeks depending on inventory status. For first-time customers, a sample request form and brief application description may be required. We recommend requesting samples early in your design phase to allow adequate time for evaluation and testing before committing to production.

Request samples early in the design phase. Order sufficient quantities for thorough evaluation and qualification.

samples evaluation request

Does CPS provide failure analysis?

Failure analysis services are available for devices that fail in application. Submit the failed device with detailed application information including circuit schematic, operating conditions, and failure symptoms.

Document failure conditions thoroughly. Include all relevant application information to facilitate root cause analysis.

failure analysis FA reliability

What is the qualification process?

CPS products undergo comprehensive qualification testing including electrical characterization, environmental stress testing, and reliability evaluation. Automotive products follow AEC-Q101 requirements.

For automotive or high-reliability applications, review qualification reports and plan any additional testing required for your specific application.

qualification reliability testing AEC-Q101

Can I get custom specifications?

Custom specifications may be available for high-volume applications. Contact our sales team to discuss your specific requirements and volume projections. Custom options may include special testing, marking, or packaging.

For volumes above 100K units annually, discuss custom options with sales. Evaluate cost-benefit of customization versus standard products.

custom special requirements OEM