TI Sensor Selection Guide
This technical reference document provides detailed information about ti product specifications, characteristics, and performance parameters. Use this information to support your design and analysis activities.
Electrical characteristics are specified over the operating temperature range unless otherwise noted. Parameters are guaranteed by design, testing, or statistical analysis. Typical values is the most likely parametric norm at 25°C.
Thermal characteristics require careful attention during system design. The junction-to-ambient thermal resistance depends on the mounting configuration, PCB copper area, and airflow conditions. Use thermal simulation tools to predict operating temperatures under actual conditions.
Reliability data is based on accelerated life testing and field failure analysis. Mean time between failures (MTBF) calculations follow industry-standard methodologies. Contact BeiLuo for detailed reliability reports and qualification data.
💡 FAE Insights
📋 Customer Cases
Industrial Equipment Manufacturer
Industrial Automation
Challenge
Needed reliable solution for new product line
Solution
Implemented TI-based reference design with BeiLuo support
Customer Feedback
"BeiLuo provided professional and timely technical support, helping us quickly resolve issues. Very satisfied with their service!"
Frequently Asked Questions
1. What temperature sensor accuracy is needed?
Accuracy depends on application. +/- 0.1C for medical, +/- 1C for industrial, +/- 2C for consumer. For detailed specifications and application support on ti products, refer to the datasheet or contact our team.
2. How to measure high currents?
Use Hall effect sensors for isolated measurement or shunt resistors with isolation amplifiers. For detailed specifications and application support on ti products, refer to the datasheet or contact our team.
3. Digital or analog sensors?
Digital sensors offer easy integration and calibration. Analog sensors provide continuous output. For detailed specifications and application support on ti products, refer to the datasheet or contact our team.
4. What is sensor calibration?
Calibration corrects sensor offset and gain errors to improve accuracy. Some sensors include factory calibration. For detailed specifications and application support on ti products, refer to the datasheet or contact our team.
5. How to interface sensors to processors?
Digital sensors use I2C or SPI. Analog sensors require ADC. Some offer PWM output. For detailed specifications and application support on ti products, refer to the datasheet or contact our team.